Nutmeg 24
| Development | |
|---|---|
| Designer | William Shaw |
| Location | Canada |
| Year | 1964 |
| Builder(s) | Tanzer Industries |
| Name | Nutmeg 24 |
| Boat | |
| Crew | Two |
| Draft | 5.25 ft (1.60 m) |
| Hull | |
| Type | Masthead sloop |
| Construction | Fiberglass |
| LOA | 24.50 ft (7.47 m) |
| LWL | 18.50 ft (5.64 m) |
| Beam | 7.58 ft (2.31 m) |
| Hull appendages | |
| Keel/board type | fixed fin keel |
| Rig | |
| Sails | |
| Mainsail area | 142.31 sq ft (13.221 m2) |
| Jib/genoa area | 125.83 sq ft (11.690 m2) |
| Total sail area | 268.14 sq ft (24.911 m2) |
|
| |
The Nutmeg 24 is a Canadian trailerable sailboat, that was designed by William Shaw and first built in 1964. The design is out of production.[1][2][3][4]
The Nutmeg 24 was featured in the July 1964 issue of Popular Boating.[1]
Production[edit]
Production of the boat was commenced in 1964 by Tanzer Industries of Dorion, Quebec. The company entered bankruptcy in May 1986 and production had ended by then.[1][4][5]
Hughes Boat Works of Canada later produced a derivative design, the Hughes 24.[1]
Design[edit]
The Nutmeg 24 is based on the earlier Oriental Mercy design of 1955 and also the Shaw 24, both wooden boats.[1]
The Nutmeg 24 is a small recreational keelboat, built predominantly of fiberglass, with wood trim. It has a masthead sloop rig, an internally mounted rudder. It displaces 3,800 lb (1,724 kg) and carries 1,475 lb (669 kg) of lead ballast.[1][2][4]
The boat has a long keel, with a retractable centreboard, that gives a draft of 5.25 ft (1.60 m) with the board down and 2.75 ft (0.84 m) with it retracted.[1][2][4]
The boat is normally fitted with a small 4 to 6 hp (3 to 4 kW) outboard motor for docking and maneuvering.[1][4]
The design has sleeping accommodation for four people. Cabin headroom is 51 in (130 cm).[4]
The boat has a hull speed of 5.76 kn (10.67 km/h).[2][4]
Operational history[edit]
In a 2010 review Steve Henkel wrote, "Best features: The boat has low freeboard and a nice springy sheer, presenting a pretty picture to dockside observers. Worst features: Despite Bill Shaw’s fame engendered by the success of his Shaw 24 in winning MORC races, the Nutmeg never measured up (though maybe it's just that she never got a chance to compete). In any case, for most folks she lacks sufficient cruising space below, and not enough boats were sold to permit organizing a one-design class for club racing."[4]
See also[edit]
Similar sailboats
- Achilles 24
- Balboa 24
- C&C 24
- Challenger 24
- Columbia 24
- Dana 24
- Islander 24
- Islander 24 Bahama
- MacGregor 24
- Mirage 24
- San Juan 24
- Seidelmann 245
- Shark 24
- Tonic 23
References[edit]
- ^ a b c d e f g h Browning, Randy (2021). "Nutmeg 24 sailboat specifications and details". sailboatdata.com. Archived from the original on 27 November 2021. Retrieved 27 November 2021.
- ^ a b c d InterVisionSoft LLC (2016). "Sailboat Specifications for Nutmeg 24". Sailing Joy. Archived from the original on 10 May 2017. Retrieved 7 July 2016.
- ^ Browning, Randy (2018). "William Shaw". sailboatdata.com. Archived from the original on 13 March 2021. Retrieved 28 November 2021.
- ^ a b c d e f g h Henkel, Steve: The Sailor's Book of Small Cruising Sailboats, page 367. International Marine/McGraw-Hill, 2010. ISBN 978-0-07-163652-0
- ^ Browning, Randy (2021). "Tanzer Industries Ltd, 1966–1986". sailboatdata.com. Archived from the original on 8 September 2020. Retrieved 27 November 2021.